NAME
    Net::Ping - check a remote host for reachability

SYNOPSIS
        use Net::Ping;

        $p = Net::Ping->new();
        print "$host is alive.\n" if $p->ping($host);
        $p->close();

        $p = Net::Ping->new("icmp");
        $p->bind($my_addr); # Specify source interface of pings
        foreach $host (@host_array)
        {
            print "$host is ";
            print "NOT " unless $p->ping($host, 2);
            print "reachable.\n";
            sleep(1);
        }
        $p->close();

        $p = Net::Ping->new("tcp", 2);
        # Try connecting to the www port instead of the echo port
        $p->{port_num} = getservbyname("http", "tcp");
        while ($stop_time > time())
        {
            print "$host not reachable ", scalar(localtime()), "\n"
                unless $p->ping($host);
            sleep(300);
        }
        undef($p);

        # Like tcp protocol, but with many hosts
        $p = Net::Ping->new("syn");
        $p->{port_num} = getservbyname("http", "tcp");
        foreach $host (@host_array) {
          $p->ping($host);
        }
        while (($host,$rtt,$ip) = $p->ack) {
          print "HOST: $host [$ip] ACKed in $rtt seconds.\n";
        }

        # High precision syntax (requires Time::HiRes)
        $p = Net::Ping->new();
        $p->hires();
        ($ret, $duration, $ip) = $p->ping($host, 5.5);
        printf("$host [ip: $ip] is alive (packet return time: %.2f ms)\n", 1000 * $duration)
          if $ret;
        $p->close();

        # For backward compatibility
        print "$host is alive.\n" if pingecho($host);

DESCRIPTION
    This module contains methods to test the reachability of remote hosts on
    a network. A ping object is first created with optional parameters, a
    variable number of hosts may be pinged multiple times and then the
    connection is closed.

    You may choose one of six different protocols to use for the ping. The
    "tcp" protocol is the default. Note that a live remote host may still
    fail to be pingable by one or more of these protocols. For example,
    www.microsoft.com is generally alive but not "icmp" pingable.

    With the "tcp" protocol the ping() method attempts to establish a
    connection to the remote host's echo port. If the connection is
    successfully established, the remote host is considered reachable. No
    data is actually echoed. This protocol does not require any special
    privileges but has higher overhead than the "udp" and "icmp" protocols.

    Specifying the "udp" protocol causes the ping() method to send a udp
    packet to the remote host's echo port. If the echoed packet is received
    from the remote host and the received packet contains the same data as
    the packet that was sent, the remote host is considered reachable. This
    protocol does not require any special privileges. It should be borne in
    mind that, for a udp ping, a host will be reported as unreachable if it
    is not running the appropriate echo service. For Unix-like systems see
    the inetd(8) manpage for more information.

    If the "icmp" protocol is specified, the ping() method sends an icmp
    echo message to the remote host, which is what the UNIX ping program
    does. If the echoed message is received from the remote host and the
    echoed information is correct, the remote host is considered reachable.
    Specifying the "icmp" protocol requires that the program be run as root
    or that the program be setuid to root.

    If the "external" protocol is specified, the ping() method attempts to
    use the "Net::Ping::External" module to ping the remote host.
    "Net::Ping::External" interfaces with your system's default "ping"
    utility to perform the ping, and generally produces relatively accurate
    results. If "Net::Ping::External" if not installed on your system,
    specifying the "external" protocol will result in an error.

    If the "syn" protocol is specified, the ping() method will only send a
    TCP SYN packet to the remote host then immediately return. If the syn
    packet was sent successfully, it will return a true value, otherwise it
    will return false. NOTE: Unlike the other protocols, the return value
    does NOT determine if the remote host is alive or not since the full TCP
    three-way handshake may not have completed yet. The remote host is only
    considered reachable if it receives a TCP ACK within the timeout
    specifed. To begin waiting for the ACK packets, use the ack() method as
    explained below. Use the "syn" protocol instead the "tcp" protocol to
    determine reachability of multiple destinations simultaneously by
    sending parallel TCP SYN packets. It will not block while testing each
    remote host. demo/fping is provided in this distribution to demonstrate
    the "syn" protocol as an example. This protocol does not require any
    special privileges.

  Functions

    Net::Ping->new([$proto [, $def_timeout [, $bytes [, $device [, $tos
    ]]]]]);
        Create a new ping object. All of the parameters are optional. $proto
        specifies the protocol to use when doing a ping. The current choices
        are "tcp", "udp", "icmp", "stream", "syn", or "external". The
        default is "tcp".

        If a default timeout ($def_timeout) in seconds is provided, it is
        used when a timeout is not given to the ping() method (below). The
        timeout must be greater than 0 and the default, if not specified, is
        5 seconds.

        If the number of data bytes ($bytes) is given, that many data bytes
        are included in the ping packet sent to the remote host. The number
        of data bytes is ignored if the protocol is "tcp". The minimum (and
        default) number of data bytes is 1 if the protocol is "udp" and 0
        otherwise. The maximum number of data bytes that can be specified is
        1024.

        If $device is given, this device is used to bind the source endpoint
        before sending the ping packet. I beleive this only works with
        superuser privileges and with udp and icmp protocols at this time.

        If $tos is given, this ToS is configured into the soscket.

    $p->ping($host [, $timeout]);
        Ping the remote host and wait for a response. $host can be either
        the hostname or the IP number of the remote host. The optional
        timeout must be greater than 0 seconds and defaults to whatever was
        specified when the ping object was created. Returns a success flag.
        If the hostname cannot be found or there is a problem with the IP
        number, the success flag returned will be undef. Otherwise, the
        success flag will be 1 if the host is reachable and 0 if it is not.
        For most practical purposes, undef and 0 and can be treated as the
        same case. In array context, the elapsed time as well as the string
        form of the ip the host resolved to are also returned. The elapsed
        time value will be a float, as retuned by the Time::HiRes::time()
        function, if hires() has been previously called, otherwise it is
        returned as an integer.

    $p->source_verify( { 0 | 1 } );
        Allows source endpoint verification to be enabled or disabled. This
        is useful for those remote destinations with multiples interfaces
        where the response may not originate from the same endpoint that the
        original destination endpoint was sent to. This only affects udp and
        icmp protocol pings.

        This is enabled by default.

    $p->service_check( { 0 | 1 } );
        Set whether or not the connect behavior should enforce remote
        service availability as well as reachability. Normally, if the
        remote server reported ECONNREFUSED, it must have been reachable
        because of the status packet that it reported. With this option
        enabled, the full three-way tcp handshake must have been established
        successfully before it will claim it is reachable. NOTE: It still
        does nothing more than connect and disconnect. It does not speak any
        protocol (i.e., HTTP or FTP) to ensure the remote server is sane in
        any way. The remote server CPU could be grinding to a halt and
        unresponsive to any clients connecting, but if the kernel throws the
        ACK packet, it is considered alive anyway. To really determine if
        the server is responding well would be application specific and is
        beyond the scope of Net::Ping. For udp protocol, enabling this
        option demands that the remote server replies with the same udp data
        that it was sent as defined by the udp echo service.

        This affects the "udp", "tcp", and "syn" protocols.

        This is disabled by default.

    $p->tcp_service_check( { 0 | 1 } );
        Depricated method, but does the same as service_check() method.

    $p->hires( { 0 | 1 } );
        Causes this module to use Time::HiRes module, allowing milliseconds
        to be returned by subsequent calls to ping().

        This is disabled by default.

    $p->bind($local_addr);
        Sets the source address from which pings will be sent. This must be
        the address of one of the interfaces on the local host. $local_addr
        may be specified as a hostname or as a text IP address such as
        "192.168.1.1".

        If the protocol is set to "tcp", this method may be called any
        number of times, and each call to the ping() method (below) will use
        the most recent $local_addr. If the protocol is "icmp" or "udp",
        then bind() must be called at most once per object, and (if it is
        called at all) must be called before the first call to ping() for
        that object.

    $p->open($host);
        When you are using the "stream" protocol, this call pre-opens the
        tcp socket. It's only necessary to do this if you want to provide a
        different timeout when creating the connection, or remove the
        overhead of establishing the connection from the first ping. If you
        don't call "open()", the connection is automatically opened the
        first time "ping()" is called. This call simply does nothing if you
        are using any protocol other than stream.

    $p->ack( [ $host ] );
        When using the "syn" protocol, use this method to determine the
        reachability of the remote host. This method is meant to be called
        up to as many times as ping() was called. Each call returns the host
        (as passed to ping()) that came back with the TCP ACK. The order in
        which the hosts are returned may not necessarily be the same order
        in which they were SYN queued using the ping() method. If the
        timeout is reached before the TCP ACK is received, or if the remote
        host is not listening on the port attempted, then the TCP connection
        will not be established and ack() will return undef. In list
        context, the host, the ack time, and the dotted ip string will be
        returned instead of just the host. If the optional $host argument is
        specified, the return value will be partaining to that host only.
        This call simply does nothing if you are using any protocol other
        than syn.

    $p->nack( $failed_ack_host );
        The reason that host $failed_ack_host did not receive a valid ACK.
        Useful to find out why when ack( $fail_ack_host ) returns a false
        value.

    $p->close();
        Close the network connection for this ping object. The network
        connection is also closed by "undef $p". The network connection is
        automatically closed if the ping object goes out of scope (e.g. $p
        is local to a subroutine and you leave the subroutine).

    pingecho($host [, $timeout]);
        To provide backward compatibility with the previous version of
        Net::Ping, a pingecho() subroutine is available with the same
        functionality as before. pingecho() uses the tcp protocol. The
        return values and parameters are the same as described for the
        ping() method. This subroutine is obsolete and may be removed in a
        future version of Net::Ping.

NOTES
    There will be less network overhead (and some efficiency in your
    program) if you specify either the udp or the icmp protocol. The tcp
    protocol will generate 2.5 times or more traffic for each ping than
    either udp or icmp. If many hosts are pinged frequently, you may wish to
    implement a small wait (e.g. 25ms or more) between each ping to avoid
    flooding your network with packets.

    The icmp protocol requires that the program be run as root or that it be
    setuid to root. The other protocols do not require special privileges,
    but not all network devices implement tcp or udp echo.

    Local hosts should normally respond to pings within milliseconds.
    However, on a very congested network it may take up to 3 seconds or
    longer to receive an echo packet from the remote host. If the timeout is
    set too low under these conditions, it will appear that the remote host
    is not reachable (which is almost the truth).

    Reachability doesn't necessarily mean that the remote host is actually
    functioning beyond its ability to echo packets. tcp is slightly better
    at indicating the health of a system than icmp because it uses more of
    the networking stack to respond.

    Because of a lack of anything better, this module uses its own routines
    to pack and unpack ICMP packets. It would be better for a separate
    module to be written which understands all of the different kinds of
    ICMP packets.

INSTALL
    The latest source tree is available via cvs:

      cvs -z3 -q -d :pserver:anonymous@cvs.roobik.com.:/usr/local/cvsroot/freeware checkout Net-Ping
      cd Net-Ping

    The tarball can be created as follows:

      perl Makefile.PL ; make ; make dist

    The latest Net::Ping release can be found at CPAN:

      $CPAN/modules/by-module/Net/

    1) Extract the tarball

      gtar -zxvf Net-Ping-xxxx.tar.gz
      cd Net-Ping-xxxx

    2) Build:

      make realclean
      perl Makefile.PL
      make
      make test

    3) Install

      make install

    Or install it RPM Style:

      rpm -ta SOURCES/Net-Ping-xxxx.tar.gz

      rpm -ih RPMS/noarch/perl-Net-Ping-xxxx.rpm

BUGS
    For a list of known issues, visit:

    https://rt.cpan.org/NoAuth/Bugs.html?Dist=Net-Ping

    To report a new bug, visit:

    https://rt.cpan.org/NoAuth/ReportBug.html?Queue=Net-Ping

AUTHORS
      Current maintainer:
        bbb@cpan.org (Rob Brown)

      External protocol:
        colinm@cpan.org (Colin McMillen)

      Stream protocol:
        bronson@trestle.com (Scott Bronson)

      Original pingecho():
        karrer@bernina.ethz.ch (Andreas Karrer)
        pmarquess@bfsec.bt.co.uk (Paul Marquess)

      Original Net::Ping author:
        mose@ns.ccsn.edu (Russell Mosemann)

COPYRIGHT
    Copyright (c) 2002-2003, Rob Brown. All rights reserved.

    Copyright (c) 2001, Colin McMillen. All rights reserved.

    This program is free software; you may redistribute it and/or modify it
    under the same terms as Perl itself.

    $Id: Ping.pm,v 1.86 2003/06/27 21:31:07 rob Exp $